factory Outlets for 3% Nickel Plated Copper Wire – Nickel Plated Copper Wire – Tianchuang
factory Outlets for 3% Nickel Plated Copper Wire – Nickel Plated Copper Wire – Tianchuang Detail:
NICKEL-PLATED COPPER WIRE
| Model | Name |
| Trn | Nickel-plated Copper Wire |
Specification
| Model | Diameter（mm） |
| Trn | 0.08-1.13 |
Product standards
GB11019-2009
Dimensions and deviations
| Diameter standard (mm) | Deviation |
| 0.110-0.250 | ±0.005 |
| 0.251-0.700 | ±0.010 |
| 0.710-1.0 | ±0.015 |
| 1.100-3.83 | ±0.020 |
Coating
1. Coating evenly,good continuity, strong adhesion.
2. The surface of the coating is smooth and continuous without harmful defects such as silvery burr mechanical damage.
Inspection rules
Product inspection: incoming material inspection-process inspection-finished product inspection, finished product inspection qualified factory, each batch of products is accompanied by quality inspection certificate.
Product detail pictures:
Related Product Guide:
It truly is our responsibility to fulfill your requirements and successfully provide you. Your fulfillment is our best reward. We're seeking forward in your check out for joint development for factory Outlets for 3% Nickel Plated Copper Wire – Nickel Plated Copper Wire – Tianchuang, The product will supply to all over the world, such as: Austria , Montpellier , Niger , Each product is carefully made, it will make you satisfied. Our products in the production process have got strictly monitored, because it is only to provide you the best quality, we will feel confident. High production costs but low prices for our long-term cooperation. You can have a variety choices and the value of all types are same reliable. If you have any question, do not hesitate to ask us.
By Denise
from Greenland
- 2018.09.29 17:23
A good manufacturers, we have cooperated twice, good quality and good service attitude.
By Mona
from Berlin
- 2018.07.27 12:26
